Cal Western Paints



No. 74 Waterborne Acrylic Glazing Liquid Clear
A Clear finish for masonry, brick, wood, paneling, etc. Where a soft low luster finish and sealer is desirable. May be used both interior or exterior as a reducer for any type of water base paint.

No. 75 Latex Extender
An extender or reducer for all vinyl/acrylic paints interior or exterior. Does not affect the solids of finish paint as water would do. Enhances ease of application and insures film integrity for all surfaces being painted.

No. 86 Aqua Bond Bonding Additive
As an additive to exterior water base paint to improve their penetration into chalking surfaces before applying finish coats of vinyl or acrylic exterior paints.

No. 93-350 and 94-350 Durathane Clear Gloss and Satin Finish
Durathane is a clear plastic coating available in a hard durable protective finish in either satin or high gloss plastic finish. Gloss may be used outside. The formulation is designed for interior use only, on such surfaces as: floors, furniture, cabinets, bar tops, wood paneling, and clean metal. This tough polyurethane film, when dry, will resist alcohol, acid, abrasion, marring, and chipping. The gloss product can be used successfully outside if not exposed to constant ultra-violet rays. Regarding air quality rules and areas of legal application please ask a certified coatings consultant or contact your local AQMD office.

No. 0493 and 0494 Acryvar Clear Gloss and Satin Finish
New wood or previously finished wood, masonry, metal, or practically any substrate where a clear coating is desired. #0493 is suitable for some exterior applications. Three coats are recommended for maximum exterior protection. Not recommended for application over oil based products unless a test is run for compatibility.

No. 0495 Urethane Gym Finish - Water Based
A water-borne aqueous urethane blended dispersion designed for gym floor finishing. Features easy application, clean-up, superior leveling and shorter recoat time than solvent based coatings. Dries to a high gloss, is fast dry, and is slip-resistant. This product is for use on interior wood surfaces only.

No. 0497 Cal-Thane Waterborne Urethane Clear Gloss
A water-borne aqueous urethane blended dispersion designed for gym floor finishing. Features easy application, clean-up, superior leveling and shorter recoat time than solvent based coatings. Dries to a high gloss, is fast dry, and is slip-resistant. This product is for use on interior wood surfaces only.

No. 080 WaterGaurd Clear Water Resistant Sealer
A clear penetrating waterproofing which provides an invisible barrier against water and resists oils, grease, acids, and similar liquids. May be used on all porous materials such as concrete, stucco, brick, block, terrazzo, unglazed tile, wood, wood shingles, canvas, and fabrics. Masonry surfaces are protected by sealing, hardening, dust proofing, and helping control efflorescence, and curing the masonry in a single operation. It protects wood from splitting, shrinking, warping, and grain deterioration caused by moisture.

No. 27 Latex-Epoxy Deck Paint
A durable interior and exterior epoxy latex floor paint. For sue on properly prepared concrete, masonry, including metal & wood steps, patios, decking & walkways. This product is not recommended for use in areas where water is standing or puddling, or where vehicles set for a long period of time on the coating.

No. 1548 Asphalt Sealer Black
A non-skid coating for use on asphalt and concrete tennis courts, game areas, decking. It is also an excellent coating for concrete that has been cured for a 90 days or longer, that is properly sealed (see manufacturer for details). This coating offers a tough durable surface that has good wet abrasion, excellent blister resistance when exposed to water and soap. Minimum dirt pick up. 90g - medium speed grit.

No. 1600 Top Coat Non-Skid Deck Coating - Slurry Finish
A non-skid coating for use on asphalt walk-ways, tennis courts, game areas, decking, breeze ways or all asphaltic type surfaces that require non-skid coating. It is also an excellent coating for concrete that has been cured for a year or better, that is properly sealed and primed. This coating offers a tough durable surface that has good wet abrasion, excellent blister resistance when exposed to water and soap. Minimum dirt pick up, available in two different aggregates, fine aggregate for tennis courts and coarse aggregate for walkways.

No. 1800 Tennis Court Coatings - Red and Green
A non-skid coating for use on asphalt and concrete tennis courts, game areas, decking. It is also an excellent coating for concrete that has been cured for a 90 days or longer, that is properly sealed (see manufacturer for details). This coating offers a tough durable surface that has good wet abrasion, excellent blister resistance when exposed to water and soap. Minimum dirt pick up. 90g - medium speed grit.

No. 2568 Deckote - Water Proofing Coating
A water-borne polyurethane single component material for use on decks including concrete, magnesite, wood, primed metal, roof terraces, balconies, walkways, breezeways, patios - interior/exterior. 2568 deckote dries hard and tough and retains its integrity even with some substrate movement. 2568 deckcote will prevent water migration into substrate while providing a tough surface to walk on. Product does not have offensive solvent fumes or odors. Dries quickly. Water clean-up. Provides tough monolithic film for lasting protection over properly prepared surfaces.

No. 2569 100% Acrylic Deckote Elastomeirc
A non-skid coating for use on asphalt walk-ways, tennis courts, game areas, decking, breeze ways or all deck type surfaces that require non-skid coating. It is also an excellent coating for concrete that has been cured for a year or better, that is properly sealed and primed. This coating offers a tough durable surface that has good wet abrasion, excellent blister resistance when exposed to water and soap. Minimum dirt pick up, available in two different aggregates, fine aggregate for tennis courts and coarse aggregate for walkways.